The Stone coated metal roof tiles system has self-locking lap and horizontal nailing method, plus the complete waterproof performance of the steel plate itself. The steel tile has a large single unit area, which is quick and convenient to install and reduces the construction period. Skilled workers can install 70-80 square meters per day.
Simple construction: The thickness and quality of the Stone coated metal roof tiles is equivalent to about 1/6 of that of ordinary cement and clay tile. It is very light and easy to cut and bend. There are more matching node accessories, which makes the installation more simple, fast and easy. It can also be easily constructed on high-rise buildings and buildings with steep slopes.
1. According to the laid wooden keel rows, fix the wood square with a width of 30mm and a height of 25mm on the cement base along the line (shun water strip), the spacing is not more than 600mm, and the depth of riveting into the base is not less than 30mm. After installation of the downwater strips, nail the hanging tiles on the downwater strips. They should be kept continuous one by one in the horizontal direction, only to be disconnected on both sides of the gutter and roof ridge control line, with a distance of 368 mm.
2. In order to ensure that the hanging tile is on a flat surface, when installing the hanging tile, wooden wedges of different sizes can be added under the hanging tile to adjust the surface of the hanging tile;
3. At the roof ridge, gable side, and herringbone outer edge, the height of the wooden keel is increased by 40mm in order to meet the installation requirements of ridge tiles and metal edging.
4. The lightning protection vertical poles can be carried out at the same time when the tiles are installed, and they cooperate with each other.
Acceptance of Stone coated metal roof tiles hanging tiles:
1. Material acceptance: non-deformable wooden squares or metal materials of corresponding specifications after drying and anti-corrosion treatment.
2. Size acceptance: The cross-sectional size of the hanging tile is 30mm×25mm, and the error is ±3mm.
3. Arrangement spacing acceptance: Except for the spacing between the roof tiles at the cornice and the two sides of the roof is less than 368mm, the standard spacing of the tiles is 368mm.
4. Flatness acceptance: pull the wire for each roof hanging tile, and detect the flatness error, the allowable error is 5mm.
5. Stability acceptance: check whether the hanging tiles are loose and whether they are firmly connected to the base.
The above are the details that should be paid attention to in the construction of Stone coated metal roof tiles. Have you learned it? If you want more product details, please contact us.
