As a new type of building material, the Stone Coated Roof Tile has been widely used because of its lightness, durability, and beauty. Especially in recent years, the country has vigorously developed environmental protection building materials. Its recyclable characteristics also allow It is very popular. Today, I will introduce some precautions when installing the color stone metal tile:
The main features of Stone Coated Roof Tile: light weight per unit area, convenient and quick installation, long service life, dustproof and self-cleaning, recyclable, etc.
Fast and convenient installation means that the installation of Stone Coated Roof Tile does not require too many rules and requirements. According to different tile types, 2.1-2.3 pieces can actually lay one square meter, basically according to the installation rules of glazed tiles. The difference is that glazed tiles It is heavier, the bottom does not need nails to fix, the colored stone metal tile does not need to be fixed, and the sun angle ridge tile glazed tile does not need to be fixed, and the colored stone metal tile needs to be fixed by hanging tiles. In general, the difference is not big. Including the size of the spacing between the tiles and the size of the tiles are basically the same.
There are still some points to pay attention to in detail:
Find out the size and spacing of the hanging tiles, which will affect your roof loss, that is, the number of tiles used, which must be calculated;
Fortunately, install the tiles from bottom to top. If you have calculated the size of the roof, you can install them from top to bottom; they can also be installed from top to bottom; dislocation overlap, do not row to the top, as the overlap may cause rain or leave Gap; roof yin and yang angles (ridge tiles), correct position of hanging tiles, and binding; installation loss is well controlled, some roof structures are more complicated, and the amount of work is relatively large, you need to consider, some roof corners, corners It is necessary to measure the bevel, and try to lay aside from the ditch first to avoid the appearance of small leftover materials, which may cause unnecessary wear and tear and waste.
Fix the position of the Stone Coated Roof Tile, that is, where the nails are fixed. The upper part of the tiles is covered by the second row of tiles at the bottom. There is no special requirement for the nail position, but it must be fixed firmly. The leaking nails should be nailed horizontally or from the bottom to the top of the hanging strips. Try not to nail them on the front of the tiles. They should be nailed to the arc lap joints at the bottom of the tiles, or places that are not easily exposed to water; The key is that the leaking nails and the severely bumped parts should be repaired by a repair kit; then the accessories are fixed. The Stone coated metal roof tiles needs a variety of accessories, and the functional attributes of the product accessories should be learned from the manufacturer.
